When filling in the right side at the top, I left the ends of the strip overlap the centreline. The next step is to trim those to the centreline with a chisel. So all I need to do is find my chisels, scrape off the rust, sharpen them and chisel out a straight 8 foot line with a slight bevel. This definitely gave me the willies. I hummed and hawed about other ways to do it, but finally bit the bullet and with a little touchup with the rasp, sander and dremel came up with a line that if you got far enough back and squinted, it looked straight. The real test would be when I filled in the second half.
No comments:
Post a Comment